2019 Car Diagnostic tool Green EcoOBD2 Economy Chip Tuning Box OBD Car Fuel Saver Eco OBD2 for Benzine Cars Fuel Saving 15%

Installation and Calibration

1 - Pull the Car Key out from the ignition.

2 - Find OBD2 connector(*) in your car and Plug in EcoOBD2

3 - Insert the key into the ignition and twist the key to the first stage. (Do not start the car)

4 - Press the reset buttom for about 5 sec. After releasing the buttom, just wait for a while about 30-54 sec. (EcoOBD2 will communicate and establish connection with ECU)

5 - Start up the engine.

6 - EcoOBD2 will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus EcoOBD2 will adjust itself to match your car perfectly for more fuel saving.

Feature:

Plug EcoOBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on. 

EcoOBD2 settings are optimal and the best for your car. Even the parameters are different for each vehicle, 

there might not be a need to make an additional adjustment. 

EcoOBD2 will recognize your vehicle and your driving habits after around 200 km/150 miles driving, 

and then EcoOBD2 adjusts itself to match your car perfectly.

What is EcoOBD2 Chip Tuning Box?

EcoOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to decrease the fuel consumption of your car. 

When it  plugged into OBD2 connector, EcoOBD2 receives the information from the car computer ECU. With the received data from ECU, 

EcoOBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to decrease the fuel consumption of your car. 

EcoOBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine. 

EcoOBD2 finds out the hidden power of your car. 

EcoOBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting. 

EcoOBD2 does not change any of the settings permanently. To turn back to the car's original settings, just unplug EcoOBD2 from OBD2 connector.